Eizo ColorEdge CG211 Calibration Color LCD Monitor Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Telewizory i monitory Eizo ColorEdge CG211 Calibration Color LCD Monitor. MV with Eizo CG211 C3 Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 6
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
Off-Press Proof Application Data Sheet
Kodak Matchprint Virtual Proofing System
with Eizo CG211 Display for SWOP Coated #3
The IDEAlliance Print Properties Working Group has established a certification process for off-press proofs as input material to
publications. In accordance with this process: “The appearance of a hard copy or monitor proof used in this application must have
the ability to closely match specific CGATS or other documented characterization data sets within outlined tolerances.” See
further explanations and recommendations outlined on www.swop.org or www.gracol.org.
The following information is intended to assist producers and consumers in the use of vendor specified proofing materials in an off-
press proof application:
I. Manufacturer
Eastman Kodak Company
343 State Street
Rochester, NY 14650 U.S.A.
II. Product
Kodak Matchprint Virtual Proofing System with Eizo CG211 Display
III. Introduction
Kodak Matchprint Virtual Proofing System provides for color-accurate viewing of CMYK files on suitable Liquid Crystal Display
(LCD) electronic monitors. Users may select custom or standard color rendition targets, including a standard / supplied SWOP
Coated #3 color profile, which is freely available to all users. Visual match to corresponding SWOP Coated #3 hard copy
reference proofs is achieved and can be confirmed by selecting this profile when viewing a digital file on the monitor screen and
simultaneously viewing the reference hard copy proof under controlled lighting conditions. A Matchprint Virtual Monitor Calibrator
instrument (specially manufactured and calibrated colorimeter) and software tool to automatically confirm and report compliance
with SWOP Coated #3 color standards are supplied as standard components in Matchprint Virtual Version 5.1 and later.
IV. Control Guide
IDEAlliance specifies a control guide such as an ISO 12647-7 Digital Control Strip 2007 be supplied on every off-press proof. As a
minimum, the guide used for proofing applications should contain solids for the primary process colors (YMCK), two-color
overprints (RGB) and a three-color overprint (YMC), as well as 25%, 50%, and 75% tints in stated line screen resolution of each of
the primary process colors and 3-color gray patches. All control guides should be checked for accuracy of the original values. Use
and interpretation of a control guide is the responsibility of the creator.
Przeglądanie stron 0
1 2 3 4 5 6

Podsumowanie treści

Strona 1 - Coated #3

Off-Press Proof Application Data Sheet Kodak Matchprint Virtual Proofing System with Eizo CG211 Display for SWOP Coated #3 The IDEAlliance

Strona 2 - V. System Components

V. System Components Hardware: 1. Eizo Nanao Technologies ColorEdge CG211 LCD Display, with cables. 2. Kodak Matchprint Virtual Monitor Calibrator,

Strona 3

For more information please see the Matchprint Virtual 5.x System Administration Guide. (https://ecentral.kodak.com/eCentral/Self_support/product_sup

Strona 4 - VIII. Sample Proofs

complete (approximately 10 seconds), click on the LCD display screen to select it for SWOP Coated #3 color confirmation. c. Position the Kodak Monit

Strona 5

Appendix 1 Characterization Data CIELab Values IDEAlliance ISO 12647-7 Digital Control Strip 2007 for SWOP 2006 Coated #3 CIELab Data Maximum Patch

Strona 6

Appendix 2 CIELab Values from Matchprint Virtual Color Check Application using Kodak Matchprint Virtual Monitor Calibrator SWOP 2006 Coated #3

Komentarze do niniejszej Instrukcji

Brak uwag